LED PLL INSTAlite - 17W/25W

Features

  • Energy saving up to 58% compare to PLL 36W / 40W system
  • Perfect retrofit traditional lamps for INSTANT START circuit
  • 280° beam angle allows fixture to maintain original light distribution by parabolic reflector
  • Smooth operation even at low temperatures down to -20°C
  • No mercury and hazardous substances
  • Compatible with most common instant start electronic ballasts (Refer to the ballast compatibility list)
  • No re-wiring cost
  • Full glass body with safety approval

Diagrams

Standards

Applications

Home

Hotel

Supermarket

Restaurant

Technical Data+
Electrical
Rated Wattage [W] 17W / 25W
Rated Voltage [V/Hz] 110-130Vac, 50/60Hz
Power Factor @120V 0.95
Input Current [mA] @120V 149 / 219
LED SMD
Model
LED F17PLL/8XX/G/NA/IS 17W
LED F25PLL/8XX/G/NA/IS 25W
Luminous Flux [lm]
17W 2000lm @3000K
2000lm @3500K
2100lm @4000K
2150lm @5000K
25W 2500lm @3000K
2500lm @3500K
2550lm @4000K
2600lm @5000K
Performance
SDCM <6
Estimated Yearly Energy Cost [$USD] 2.05 / 3.01
Luminous Efficacy [lm/W] 100-126
Color Rendering Index [Ra] ≥80
Color Maintenance [hr] >6000
Luminous Intensity Distribution [°] 360
Life [Yrs] (based on 3hrs/day) 23
Lumen Maintenance at 6000hrs >0.8
Rapid Cycle Stress >15,000 cycles
Start Time [sec] <0.5
LED Failure <5%
Mechanical
Diameter D [in] Φ1.69
Length L [in] 21
Base 2G11
Material Glass
Standard Compliance
ANSI UL8750, UL1993, UL1598, C82.77-2002, C78.377-2008
FCC FCC CFR Part 15, FCC CFR Part 18
Mercury Content [mg] 0.0
Other
Dimmable [Y/N] N
Operation Temperature -20°C ~ 50°C
Storage Temperature -10°C ~ 30°C
back